Quanchuang intelligent mechanical equipment introduces in detail: precautions for wet tissue folding machine
1. Before starting, ensure that the working voltage, current and hydraulic press are appropriate and stable.
2. Before the equipment is ready for operation in advance, all employees need to notify the leaving equipment to ensure life safety before starting operation.
3. During operation, do not touch the running film roll or roll core with your palm to prevent accidental injury caused by hand winding.
4. During the operation process, do not scratch or scratch each roll core with a knife or hard block.
Chapter - Packaging: before the equipment is put into operation, check whether each working position can be adjusted stably. The parts to be moistened should be filled with lubricating oil in advance. Check whether the NC blade is sharp. After everything is normal, the air switch shall be operated first to check whether there is any abnormality, and the items to be outsourced shall be typed into the computer in advance to place an order for detection; After the equipment is put into operation, the minimum operation state of the equipment shall be adjusted immediately according to the production and manufacturing conditions to ensure that the stamping of the blocking machine is appropriate, the segmentation is free of burrs, and the blank pressing parts on both sides are suitable. Ensure smooth feeding and discharging of cross cutting machine, wet towel machine, cutting length, vertical and horizontal cutting machine connected with enterprise production management
It is also necessary to monitor its operation at all times to prevent paper blockage and poor products; After the work, immediately remove the dust and paper fragments on the equipment, check the knife grinding skills and sand wheel, drain the water in the milk water heater and the air storage tank of the air compressor, and check whether there are abnormalities in the operating parts. Then, disconnect the switching power supply according to the actual operation provisions of the instructions and maintain the computer operating system on the computer.